Got a red light on your BESTEK inverter?
Don’t worry.
The red light on your inverter is designed to alert you to a problem.
By understanding what the red light means you can quickly fix the problem.
Let’s go through the BESTEK inverter red light issue.
What Does the Red Light Mean?
Firstly, the red light on a BESTEK inverter can point to a number of different issues.
Happily, the light will do something different depending on the problem.
Red Light Always On
If the red light is constantly on without flashing or blinking then this means the inverter is in short-circuit protection mode.
To fix this you should turn off the inverter by pressing the power button. Once the red light disappears you should restart the inverter. Usually, this should work and a solid green light will show.
If this does not fix the problem it is likely that you have a short circuit. You need to check the cables and the circuits to see if you can identify the short circuit.
Red Light Flashes
With a flashing red light, you have an overload problem. This means you are trying to draw too much power to your devices and appliances.
You need to unplug your appliances until the LED turns to a green light. The inverter will work as normal now.
If your inverter doesn’t give the green light, unplug all devices and switch the inverter off and on again.
Remember not to try and run appliances with a higher wattage than the output watts of your inverter.
Green and Red Light Flashing
Have you got the green and red lights flashing in alternate? This signals the inverter is overheating or the cooling fan is not running.
If your fan is running but you still get the overheat warning then you need to remove your appliances and shut down the inverter. You should leave it for 5 to 10 minutes to cool down before restarting. Your inverter will not run until it has cooled down enough.
If the cooling fans are not spinning then you need to check for an obstruction. When the fans are obstructed they can’t spin to draw cool air through your system. This leads to overheating.
Another thing to note, if you’re inverter regularly overheats you should not run as power appliances from it as you might be overloading the system. You should also make sure to place it in well-ventilated areas and that the vents are not obstructed.
Green Light Flashing
One final signal in a BESTEK inverter is the green light flashing. This alerts you to low voltage or overvoltage. In this case, you need to check your battery and connection.
Low battery will result in low voltage. Plus low voltage can also come from poor cable connection so check all your wires are connected properly.
Overvoltage usually comes from using the wrong battery size with your inverter. Inverter input and battery voltage should match. For example, use a 12V battery with a 12V inverter. If a battery voltage is too big (24V battery with 12V inverter) you will get overvoltage.
Final Words on BESTEK Inverter Red Light
You should pay close attention to the LED lights on your BESTEK inverter.
They give you key information on the operational status of your equipment. Plus it can alarm you to any problems you have. You should not ignore the lights as this leads to the inverter not working and even a safety issue.
The red light on a BESTEK inverter will be because of overload, short-circuit, or overheating.
